SOLAR PANEL REMOVAL AND REINSTALL

Schedule A Demo & Get A Free
Quote

Solar panel removal and reinstallation can be a complex task that requires careful planning and attention to safety. If you are not comfortable or experienced with working with electrical systems, it is recommended that you hire a professional to handle the job. A professional will have the necessary tools and expertise to safely and effectively remove and reinstall your solar panels.

Before beginning the removal process, it is important to gather all necessary tools and equipment, including a ladder, drill, screwdriver, wire stripper, wire nuts, and a voltage tester. It is also important to ensure that the electricity to the panels is shut off. To start the removal process, locate the panels on the roof and remove any debris or dirt that may have accumulated on them. Next, locate the mounting hardware and remove the screws or bolts that secure the panels to the roof. Carefully lift the panels off the roof and place them on a flat surface.

If you’re looking to make the switch to clean, renewable energy, we’re here to help. Our team of experienced professionals will work with you every step of the way to design and install a customized solar panel system that meets your energy needs and budget.​

If the panels are connected to a solar inverter, you will need to disconnect the wires from the inverter before removing the panels. To do this, locate the wire connections on the inverter and use a wire stripper to remove the insulation from the ends of the wires. Carefully disconnect the wires by removing the wire nuts and pulling the wires apart.

Once the panels are removed, it is important to properly store them to prevent damage. If the panels are being reinstalled in the same location, they can be placed on a flat surface, such as a garage floor or a driveway, until they are ready to be reinstalled. If the panels are being moved to a new location, they should be carefully packed and transported to their new home.

To reinstall the panels, the process is similar to the removal process in reverse. Secure the panels to the roof using the mounting hardware, and then reconnect the wires to the inverter. Finally, turn the electricity back on and test the panels to ensure they are functioning properly.

Scroll to Top